All Products
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
F1
Industrial Lighting
Weatherproof Batten 1220mm
LC5320
The TITAN 45W Weatherproof batten 1220mm has been introduced as a premium quality batten, high-efficiency, and very easy to install. The TITAN batten series is the perfect LED solution for replacing conventional fluorescent weatherproof luminaires. IP66, designed for harsh environments. This luminaire is designed to with the perfect balance of value and efficiency. Also available with motion sensors, and emergency kit.
Stainless Steel 316 Clips available.
Optic Specifications
-
Light Source
LG LEMWS28R80 Series
-
Delivered Lumens
5680lm
-
CRI
80Ra
-
Beam Angle
120°
-
Colour Deviation
SDCM ≤ 3
-
Reported L70 (Hours)
> 54,000 Hrs
-
Calculated L70 (Hours)
134,000 Hrs
-
F2
Commercial Lighting
Panel Light, IP54, 1237x337
LC7415
BURNET 40W Cleanroom 1200x300 Panel Light is specifically designed for clean-room environments and other hygienic places. The BURNET Cleanroom Panel Light is named after Mr Frank Burnet, an Australian virologist best known for his contributions to immunology.
2-sides edge-lit for improved heat dissipation and longer lifespan. 100% PMMA Light Guide Plate, to avoid yellowing over time. Flicker-Free Driver. Bevel Edge Design, to eliminate dust build-up. Surface Mount Design, 12mm depth. For an easy install, make a 90mm cutout in the ceiling, to recess the LED driver in the ceiling cavity.
-
F2 alt
Commercial Lighting
Rectangle Panel Light 1200x300
LC7161
The BLAIZE 30W LED Panel Light is at the leading edge of commercial lighting. Use this 2' x 4' rectangular LED panel light for office lighting, basement lighting, gym lighting, school lighting and hospital lighting! BLAIZE LED light panels are designed for residential and commercial suspended grid ceilings. Replace existing fluorescent troffer light fixtures or use for new construction applications. Eliminate maintenance costs and enjoy a high efficiency light source. With an optical diffuser, the LED panel light delivers a smooth, flawless wall of illumination without visible bulbs or hot spots. Mount with our suspension kit, plaster recess kit or surface mount kit. Dimmable driver available.
Material Specifications
-
Material
White Aluminium Frame. PMMA
-
Dimensions
1195mm (L) x 295mm (W) x 12mm (D)
-
Ingress Protection
IP44
-
Warranty
5 Year Replacement
-
Weight
3.2Kg
-
Accessories
Surface Mount, Plaster Recess & Suspension Kits
Electrical Specifications
-
Power Supply
Non-Dim Boke Remote Driver
-
Options
DALI Available
-
Connection Method
Australian 2-Pin Plug & 1.0m Lead
-
Input Voltage
240V
-
Operating Temperature (Ta)
-20°C to +45°C
-
F2 alt - Kit
Commercial Lighting
Plaster Recess Kit
LC7043
The BLAIZE LED Panel Light is at the leading edge of commercial lighting. The plaster frame allows greater flexibility to the BLAIZE, CREST & APEX product range. It provides the ability for t-bar fixtures to be installed into plaster ceilings without any modifications to the original t-bar luminaire design. Surface Mount and Suspension Kits also available.
Dimensions
-
Dimensions
31mm Overall Depth
-
Cutout
LC7043: Plaster Cutout: 1215 x 315mm - Overall Frame: 1232x332mm
-
Cutout
LC7039: Plaster Cutout: 315 x 315mm - Overall Frame 332 x 332mm
-
Cutout
LC7041: Plaster Cutout: 615 x 315mm - Overall Frame 632 x 332mm
-
Cutout
LC7042: Plaster Cutout: 615 x 615mm - Overall Frame 632 x 632mm
-
Cutout
LC7044: Plaster Cutout: 1215 x 615mm - Overall Frame: 1232x632mm
-
F5
Commercial Lighting
Panel Light, IP54, 637x337
LC7402
The BURNET 24W Cleanroom Panel Light is specifically designed for clean-room environments and other hygienic places. It provides an ideal solution for pharmaceutical, medical, and other sterile areas. The BURNET Cleanroom Panel Light is named after Mr Frank Burnet, An Australian virologist best known for his contributions to immunology.
2-sides edge-lit for improved heat dissipation and longer lifespan. 100% PMMA Light Guide Plate, to avoid yellowing over time. Flicker-Free Driver. Bevel Edge Design, to eliminate dust build-up.
Surface Mount Design. 12mm depth. For an easy install, make a 90mm cutout in the ceiling, to recess the LED driver in the ceiling cavity.
Optic Specifications
-
Light Source
4014-JT-K1606 Series
-
Nominal Lumens
2,455lm (4000K)
-
Efficacy
98.1 lm/W
-
CRI
Ra 82
-
Beam Angle
120°
-
Reported L70 (Hours)
> 54,000 Hrs
-
L2-R-B
Downlights
Recessed Fixed Downlight
LC3590B
The EMPRESS 13W fixed downlight is an architectural downlight, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians. It adopts a high lumen COB LED, and PMMA diffuser with even light output. The DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Dimensions
110mm Face Dia x 65mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable, 23-40VDC 280mA
-
System Watts
11.4W - 12.1W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L2-R-W
Downlights
Recessed Fixed Downlight
LC3590
The EMPRESS 13W fixed downlight is an architectural downlight, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians. It adopts a high lumen COB LED, and PMMA diffuser with even light output. The DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Dimensions
110mm Face Dia x 65mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable, 23-40VDC 280mA
-
System Watts
11.4W - 12.1W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L4-R-W
Downlights
Recessed Gimbal Downlight
LC3582
The EMPRESS 8W gimbal downlight is available as DALI dimmable, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians.
EMPRESS 8W LED gimbal Downlight adopts a high lumen COB LED, and PMMA diffuser with even light output. DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Adjustment
30° gimbal
-
Dimensions
110mm Face Dia x 50mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable 23-40VDC 180mA
-
System Watts
7.7W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L4-R-B
Downlights
Recessed Gimbal Downlight
LC3582B
The EMPRESS 8W gimbal downlight is available as DALI dimmable, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians.
EMPRESS 8W LED gimbal Downlight adopts a high lumen COB LED, and PMMA diffuser with even light output. DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Adjustment
30° gimbal
-
Dimensions
110mm Face Dia x 50mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable 23-40VDC 180mA
-
System Watts
7.7W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L7-B
Track Lighting
Adjustable Tracklight
LC5194
Track Lighting is popular in applications such as museums, art galleries, restaurants and retail spaces because of its unique flexibility in positioning the direction of the light, and the ability to add or remove fittings to achieve the desired luminance levels. With precise beam control which ranges from 12° to 40°, the ALPHA Track Light serves to focus the viewer's attention onto a piece of art work or display.
Electrical Specifications
-
Power Supply
Integrated Tridonic 15W Driver 350mA, Non-Dim
-
System Watts
15.0 - 15.8W
-
Options
DALI available
-
Input Voltage
240V
-
Operating Temperature (Ta)
-20ºC ~ +40ºC
-
Connection Method
3-Circuit Track Connector. Sold Separately
Optic Specifications
-
Light Source
13W Citizen LED
-
Delivered Lumens
1,027lm (3000K)
-
Delivered Lumens
1,191lm (4000K)
-
Efficacy
Up to 79.4lm/W
-
Beam Angle
40° (12°/ 25° options)
-
CRI
Ra >91
-
Colour Deviation
SDCM ≤ 3 (MacAdam)
-
Reported L70 (Hours)
> 54,000 Hrs
-
L7 - Track (2m)
Track Lighting
Surface Mount
LC3803
Surface Mount Track Light, 20 amp, 2 metre lengths. Can be cut to length onsite. Applications include Retail spaces, Commercial offices, Showrooms and art galleries.
The ALPHA Track is easy to install in any project, with all the required components available to provide any custom configuration. The spot lights can be adjusted to give you endless flexibility with light positioning and brightness.
-
Lt - Track (3m)
Track Lighting
Surface Mount
LC3806
Surface Mount Track Light, 20 amp, 2 metre lengths. Can be cut to length onsite. Applications include Retail spaces, Commercial offices, Showrooms and art galleries.
The ALPHA Track is easy to install in any project, with all the required components available to provide any custom configuration. The spot lights can be adjusted to give you endless flexibility with light positioning and brightness.
-
L7 - Live End
Track Lighting
Live End Connector
LC3861
Surface Mount Track Light Connectors. Includes codes for Live-End Connectors, Live-Straight Connectors, Mini Straight Connectors, Flexible Connectors, and End Caps.
Applications include Retail spaces, Commercial offices, Showrooms, and art galleries.
-
L7 - End Cap
Track Lighting
3 Circuit End Cap
LC3849
Surface Mount Track Light Connectors. Includes codes for Live-End Connectors, Live-Straight Connectors, Mini Straight Connectors, Flexible Connectors, and End Caps.
Applications include Retail spaces, Commercial offices, Showrooms and art galleries.
-
L7 - Mini Joiner
Track Lighting
3 Circuit Mini Joiner
LC3841
Surface Mount 3-Circuit Mini Joiner. Track Lights need Mini Connectors.
Applications include Retail spaces, Commercial offices, Showrooms, and art galleries.
-
L7 - Corner Joiner
Track Lighting
3 Circuit 90° Connector
LC3815
Surface Mount Track Light Connectors. Includes Live-End Connectors, Live-Straight Connectors, Mini Straight Connectors, Flexible Connectors, and End Caps. 3-Circuit Left Corner Track Joiner, and Right Corner Track Joiner.
Applications include Retail spaces, Commercial offices, Showrooms, and art galleries.
-
L1-RT-W
Downlights
Rectangle Downlight
LC3425W
The WALTZ 20W rectangle downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type and lens type options. Rectangle shape with two heads. The luminaire is tilted 25° in all directions (360°), perfectly meeting the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote Driver, 500mA, Flicker Free
-
Operating Temperature (Ta)
-20°C to +45°C
-
Input Voltage
240V
Optic Specifications
-
Light Source
2 x Citizen COB LED
-
Delivered Lumens
2000lm
-
CRI
>80
-
Reported L70 (Hours)
> 54,000 Hrs
-
L1-RT-B
Downlights
Rectangle Downlight
LC3425B
The WALTZ 20W rectangle downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type and lens type options. Rectangle shape with two heads. The luminaire is tilted 25° in all directions (360°), perfectly meeting the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote Driver, 500mA, Flicker Free
-
Operating Temperature (Ta)
-20°C to +45°C
-
Input Voltage
240V
Optic Specifications
-
Light Source
2 x Citizen COB LED
-
Delivered Lumens
2000lm
-
CRI
>80
-
Reported L70 (Hours)
> 54,000 Hrs
-
L2-SQ-W
Downlights
Square Downlight
LC3420W
This WALTZ 10W downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type optic. Square shape with one head. The luminaire is tilted 25° in all directions (360°), perfectly meet the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote, 230mA, Flicker Free
-
System Watts
9.7W
-
Input Voltage
240V
Optic Specifications
-
Light Source
1 x Citizen COB LED
-
Optics
Reflector Type
-
Delivered Lumens
954lm
-
Efficacy
98.3 lm/W
-
CRI
Ra 83
-
Reported L70 (Hours)
> 54,000 Hrs
-
L2-SQ-B
Downlights
Square Downlight
LC3420B
This WALTZ 10W downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type optic. Square shape with one head. The luminaire is tilted 25° in all directions (360°), perfectly meet the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote, 230mA, Flicker Free
-
System Watts
9.7W
-
Input Voltage
240V
Optic Specifications
-
Light Source
1 x Citizen COB LED
-
Optics
Reflector Type
-
Delivered Lumens
954lm
-
Efficacy
98.3 lm/W
-
CRI
Ra 83
-
Reported L70 (Hours)
> 54,000 Hrs
-
LED1
Linear Lighting
LED Strip Light CRI95
LC9230
The INFINITY LED Strip Series is a neat, unobtrusive means to layered lighting. This beautifully small 8mm strip fits into almost any nook or cranny, whilst providing your home or work space with a gorgeous glow. Perfect for spaces with intimate settings and low light requirements, applications could include soft lighting under bench tops, behind a bar and receded in tight cavities in walls and ceilings to animate dark spaces with light. The 10W LED Strip utilises the latest generation SMD 2216 Chipset and is mounted on 8mm PCB backing.
Optic Specifications
-
Light Source
180 LED/m, 2216 SMD
-
Nominal Lumens
700lm/m
-
LED Wattage
10W/m
-
Beam Angle
120°
-
CRI
> 95Ra
-
Colour Deviation
SDCM ≤ 3
-
Reported L70 (Hours)
> 54,000 Hrs
-
LED1 - Recessed
Linear Lighting
Aluminium Profile
LC9150
The LYNE 1707 Recess Profile is a shallow recessed extrusion with sufficient depth to reduce light hot spotting. Available in 2m lengths. Aluminium profile with snap-fit diffuser. Designed for mounting LED strip up to 12mm width. Channels on the sides of the profile allow you to clip the profile into metal clips. Plastic end caps come in pairs. One having a hole for the wires to pass through.
Material Specifications
-
Material
Anodised Aluminium
-
Ingress Protection
IP20
-
Application
Joinery, Feature Lighting, Task Lighting
-
Dimensions
17.3mm(W) x 7mm(D)
-
Accessories
End Caps & Mounting Clips
-
Warranty
5 Year Replacement
-
Optics
PMMA Plastic Diffuser
-
Mounting
Recessed
-
Light Source
INFINITY 10W LED Strip recommended
-
LED1 - Surface
Linear Lighting
Aluminium Profile
LC9145
The LYNE 1707 SURFACE Profile is a surface mounted extrusion with sufficient depth to reduce light hot spotting. Available in 2m lengths. Aluminium Profile with snap-fit diffuser. Designed for mounting LED Strip up to 12mm width. Channels on the sides of the profile allow you to clip the profile into metal clips. Plastic end caps come in pairs. One having a hole for the wires to pass through. Compatible with Decrolux INFINITY LED Strip.
Material Specifications
-
Material
Anodised Aluminium
-
Finish
Aluminium, Black or White
-
Ingress Protection
IP20
-
Application
Joinery, Feature Lighting, Task Lighting
-
Dimensions
17.3mm(W) x 7mm(D)
-
Mounting
Surface Mount
-
Accessories
End Caps & Mounting Clips
-
Warranty
5 Year Replacement
-
LED1 (Corner)
Linear Lighting
Aluminium Profile
LC9160B
The LYNE 1818 Corner Profile is a surface mounted extrusion with sufficient depth to reduce light hot spotting. Aluminium profile with snap-fit diffuser. Designed for mounting LED strip up to 12mm width. Channels on the sides of the profile allow you to clip the profile into metal clips. Plastic end caps come in pairs. One having a hole for the wires to pass through. Designed to fit into corners and emit diffused light on a 45° angle.
Material Specifications
-
Material
Anodised Aluminium
-
Ingress Protection
IP20
-
Application
Joinery, Feature Lighting, Task Lighting
-
Dimensions
18mm x 18mm
-
Accessories
End Caps & Mounting Clips
-
Warranty
5 Year Replacement
-
Optics
PMMA Plastic Diffuser
-
Mounting
45° Angle
-
Light Source
INFINITY 10W or 14W recommended
-
LED2
Linear Lighting
12W Side Bending Cable
LC9104
The NEON FLEX 12W Side-bending cable is a highly advanced LED Neon Flex technology, equipped with closely spaced SMD chips and an ultra-thin housing. With a minimum bending radius of R>60mm, it boasts a side-bending design that delivers uniform lighting. The product is perfect for both indoor and outdoor decorative lighting as well as architectural outline lighting, with an IP67 rating that guarantees weatherproofing. This innovative and versatile product is an excellent choice for anyone looking for reliable and high-quality LED Neon Flex lighting.
Material Specifications
-
Dimensions
12mm x 20mm
-
Cuttable Length
50mm
-
Roll Length
5m
-
Ingress Protection
IP67
-
Warranty
5 Year Replacement
Optic Specifications
-
Light Source
12W
-
Delivered Lumens
400lm/m
-
Beam Angle
160°
-
CRI
> 90Ra
-
Reported L70 (Hours)
> 36,000 Hrs
-
LED2
Linear Lighting
to suit Neon Flex 12mmx20mm
LC9109
This profile is a surface mounted extrusion which suits Neon Flex Side-bending cable. It is suitable for use in both indoor and outdoor decorative lighting, as well as architectural outline lighting.
-
LP1
Ceiling Lights
Tube Pendant
LC1085
The STRAW 15W Tubular Pendant Light is a modern standout feature. When suspended from the ceiling, it illuminates the room with a warm, comfortable spread of light. This contemporary pendant boasts a white acrylic shade, red metal canopy, red cord, and red top/bottom cover, with a 1.5 metre suspension. Reminiscent of McDonald's drinking straws, it is perfect for creating a big impact, especially when installed in rows for a captivating visual display.
Used in McDonald's Family Restaurant Fitouts throughout Australia.
Material Specifications
-
Material
Acrylic Shade with Metal Canopy and Covers
-
Colour
White Shade, Red Canopy, Red Cord, Red Top/Bottom Cover
-
Dimensions
Tube: 800mm(L) x 70mm(W) x 70mm(D)
-
Dimensions
Base Plate: 120mm Dia x 40mm (H)
-
Suspension Length
1500mm Adjustable (Max.)
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Optic Specifications
-
Light Source
Integrated LED Strip
-
Nominal Lumens
450lm
-
CRI
>80Ra
-
Colour Deviation
SDCM ≤ 3
-
Reported L70 (Hours)
>54,000 Hrs
-
LED1/ LED2 - PS
Power Supplies
Power Supply 24V
LC6792
Osram Element 120W Power Supply 24V is a Constant Current LED Power Supply. Element LED Power Supply with high efficiency and reliability in small compact housing fits in light fixtures for office and shop lighting. Suitable for Shelf Lighting, Cove Lighting, and Under Cabinet Lighting.
Simple to use with easy installation and LED connection. SELV (<60V)
Material Specifications
-
Material
Plastic Casing
-
Weight
386g
-
Dimensions
260 x 40 x 31mm
-
Ingress Protection
IP20
-
Warranty
3 Year Warranty
Electrical Specifications
-
Input Voltage
240V 50/60Hz
-
Inrush Current
< 32 A
-
Output Current
700mA
-
Output Voltage
21VDC - 42VDC
-
Operating Temperature (Ta)
-10°C to +50°C
-
Thermal Testing
30,000 Hrs at 75°C
-
Protection
Over-Temperature, Overload, Short-Circuit
-
LP4
Interior Wall Lights
Red Shade with Black Frame
LC1259
The BARCLAY Wall Light is a sophisticated blend of style and functionality. The sleek sand black frame perfectly complements the vibrant red shade, creating a striking visual contrast. Designed for an E27 bulb (not included), this modern fixture adds a touch of elegance to any space. The bold colour combination adds a touch of contemporary flair, making it an eye-catching focal point.
Used in McDonald's Family Restaurant Fitouts throughout Australia.
Material Specifications
-
Finish
Sand Black Frame, Red Shade
-
Dimensions
772mm (L) x 255mm (Projection from Wall)
-
Dimensions
Base Plate: 100mm (W) x 250mm (H)
-
Dimensions
Red Shade Dia: 260mm
-
Ingress Protection
IP20
-
Warranty
1 Year Replacement
-
LP2
Interior Wall Lights
Oak Timber Wall Light
LC1086
The FRY 10W Oak Timber Wall Light is a linear fixture designed to make a bold statement. Its design, reminiscent of McDonald's fries, adds a playful touch. Crafted with Natural Oak and featuring an Acrylic Diffuser, this wall light blends style and functionality, offering a striking illumination that harmonises with diverse environments.
Used in McDonald's Family Restaurant Fitouts throughout Australia.
Optic Specifications
-
Light Source
10W LED Strip
-
Delivered Lumens
> 450lm
-
CRI
> 80Ra
-
Reported L70 (Hours)
>54,000 Hrs
-
L8
Track Lighting
Adjustable Tracklight
LC5107B
Track Lighting is popular in applications such as museums, art galleries, restaurants, and retail spaces because of its unique flexibility in positioning the direction of the light, and the ability to add or remove fittings to achieve the desired luminance levels. With a 60° beam angle and changeable colour temperature, the ESSENCE Track Light is perfect for a versatile environment and can set the mood in any room.
Electrical Specifications
-
Power Supply
Integrated Driver, Phase-Dim
-
Input Voltage
240V
-
Operating Temperature (Ta)
-20ºC ~ +40ºC
-
Connection Method
4-Wire, 3-Circuit Track Connector
-
LP4 - Globe
LED Light Globes
6W LED
LC2305
This 6 watt LED dimmable light bulb has been designed to emulate the classic incandescent bulb. This LED bulb is a powerful light (equivalent to that of a standard 40w incandescent bulb) making it environmentally friendly.
Inside these LED bulbs are low energy LED strips, designed to imitate the vintage style incandescent filaments. These 95mm round LED globes have very low energy consumption and an extremely long lifespan as it uses 80% less power than conventional incandescent bulbs. They give instant 100% light, no warm-up time. Dimmable so you can lower the intensity to create atmospheric lighting. Each LED bulb has a 360° beam spread, ideal for a wide variety of lighting decors; from home use, café interiors, restaurant lighting, office fit outs and more!
Material Specifications
-
Finish
Clear
-
Dimensions
130mm (L) x 95mm (Dia)
-
Typical Lifetime
15,000 hours
Optic Specifications
-
Delivered Lumens
500lm
-
Beam Angle
360°
-
CRI
90Ra
-
A7
Downlights
LED Recessed Downlight 140mm
LC3631
The KARGO 18W downlight is phase dimmable, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians.
KARGO 18W LED Downlight adopts a high lumen SMD LED, and PMMA diffuser with even light output.
Electrical Specifications
-
Power Supply
Remote Driver 300mA, Phase Dim
-
Options
DALI Availbale
-
System Watts
17.1W - 17.7W
-
Thermal Testing
Compliant with IC-4 Classification
-
Operating Temperature (Ta)
-20°C to +45°C
-
Input Voltage
240V, 50/60Hz
-
Connection Method
Australian 2-Pin Plug & 0.6m Lead
Optic Specifications
-
Light Source
18W SMD 2835 LED
-
Delivered Lumens
1775lm (3000K)
-
Delivered Lumens
2062lm (4000K)
-
Delivered Lumens
1990lm (5500K)
-
Efficacy
Up to 120.3lm/W
-
CRI
>82Ra
-
Beam Angle
100°
-
Calculated L70 (Hours)
L70B50 = > 60,000 Hrs
-
Calculated L80 (Hours)
L80B50 = > 60,000 Hrs
-
Calculated L90 (Hours)
L90B50 = > 56,000 Hrs
-
EM-W
Exit / Emergency Lighting
Recessed Emergency Light
EMS-PRO
Synthium D80 LED Recessed Emergency Light c/w Synthium Battery.
The Emergensee Pro combines a lifetime-warranted LED with a Syclops optical lens to deliver an unobtrusive, ultra bright source of illumination intended to alleviate panic and establish a safe, distinct and efficient egress path in the event of an emergency. It can be used in almost all internal general applications including offices, shopping centres, commercial properties, and residential buildings.
Synthium nanotechnology is an advanced environmentally-sustainable energy development that offers extended battery life, low cost of ownership, enhanced performance and improved safety.
Electrical Specifications
-
Input Voltage
230V; 50Hz
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger & battery management
-
Protection
Overcharge, low voltage disconnect, overcurrent, short circuit
-
Mode of Operation
Non-Maintained
-
Connection Method
Australian Plug + 1.2m Lead
-
Emergency Duration
>120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charge Green LED
-
EM-B
Exit / Emergency Lighting
Recessed Emergency Light
EMS-PRO-B
Synthium D80 LED Recessed Emergency Light c/w Synthium Battery.
The Emergensee Pro combines a lifetime-warranted LED with a Syclops optical lens to deliver an unobtrusive, ultra bright source of illumination intended to alleviate panic and establish a safe, distinct and efficient egress path in the event of an emergency. It can be used in almost all internal general applications including offices, shopping centres, commercial properties, and residential buildings.
Synthium nanotechnology is an advanced environmentally-sustainable energy development that offers extended battery life, low cost of ownership, enhanced performance and improved safety.
Electrical Specifications
-
Input Voltage
230V; 50Hz
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger & battery management
-
Protection
Overcharge, low voltage disconnect, overcurrent, short circuit
-
Mode of Operation
Non-Maintained
-
Connection Method
Australian Plug + 1.2m Lead
-
Emergency Duration
>120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charge Green LED
-
EX-BD-B
Exit / Emergency Lighting
Recessed Exit Light
EXS-BLADE-B
Exodus LED Recessed Mounted Blade Exit Light c/w Synthium Battery. The EXODUS Blade is a sleek and aesthetically pleasing recessed lithium exit light that provides a touch of class and elegance to enhance the look of any premium interior space.
Its ease of installation and stylish Running Man pictogram positions this fitting as the leading edge in the industry. Suited for apartments, public buildings, offices and retail outlets. Includes all variations of Running Man pictogram. C0-D6.3, C90-E3.2
Material Specifications
-
Material
Flame - Retardant Polycarbonate
-
Application
Recessed - Plaster Ceilings
-
Dimensions
457mm(L) x 100mm(W) x 200mm(H)
-
Cutout
430mm x 75mm cutout
-
Weight
1.5Kg
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Electrical Specifications
-
Mode of Operation
Maintained
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger and battery management
-
Operating Temperature (Ta)
1°C - 40°C
-
Protection
Overcharge, Low Voltage Disconnect, overcurrent, Short Circuit
-
Connection Method
Complete with Australian Plug + 1.2m Lead
-
Emergency Duration
> 120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charger Green LED
Optic Specifications
-
LED Wattage
4W (Standby)
-
Light Source
High Output LED Strip
-
AS2293 Classification
C0-D6.3, C90-E3.2
-
EM-BD
Exit / Emergency Lighting
Recessed Exit Light
EXS-BLADE
Exodus LED Recessed Mounted Blade Exit Light c/w Synthium Battery. The EXODUS Blade is a sleek and aesthetically pleasing recessed lithium exit light that provides a touch of class and elegance to enhance the look of any premium interior space.
Its ease of installation and stylish Running Man pictogram positions this fitting as the leading edge in the industry. Suited for apartments, public buildings, offices and retail outlets. Includes all variations of Running Man pictogram. C0-D6.3, C90-E3.2
Material Specifications
-
Material
Flame - Retardant Polycarbonate
-
Application
Recessed - Plaster Ceilings
-
Dimensions
457mm(L) x 100mm(W) x 200mm(H)
-
Cutout
430mm x 75mm cutout
-
Weight
1.5Kg
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Electrical Specifications
-
Mode of Operation
Maintained
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger and battery management
-
Operating Temperature (Ta)
1°C - 40°C
-
Protection
Overcharge, Low Voltage Disconnect, overcurrent, Short Circuit
-
Connection Method
Complete with Australian Plug + 1.2m Lead
-
Emergency Duration
> 120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charger Green LED
Optic Specifications
-
LED Wattage
4W (Standby)
-
Light Source
High Output LED Strip
-
AS2293 Classification
C0-D6.3, C90-E3.2
-
EX-BOH
Exit / Emergency Lighting
Surface Mount Exit Light
EXS-PRIME
Synthium LED Surface Mounted Exit Light complete with Synthium Battery. The EXODUS Prime is a low maintenance, wall or ceiling mountable exit light solution with all variations of the running man pictogram which offers many years of reliable, succinct and efficient Exit Lighting.
Using a simple slide and connect installation, its robust design allows it to be used in a wide variety of indoor applications, ranging from offices to retail stores, cafes and public spaces. C0-D3.2, C90-E2.5
Material Specifications
-
Material
Flame-Retardant Polycarbonate
-
Mounting
Surface Mounted - Wall or Ceiling
-
Dimensions
355mm(L) x 65mm(W) x 210mm(H)
-
Weight
1.5Kg
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Electrical Specifications
-
Input Voltage
240V; 50Hz
-
Mode of Operation
Maintained
-
Battery & Charger System
Lithium Battery w. Intelligent 3-stage charger and battery management
-
Operating Temperature (Ta)
1°C - 40°C
-
Protection
Overcharge, low voltage disconnect, overcurrent, short circuit
-
Connection Method
Large Terminal Block, 20mm² Cable Entry
-
Emergency Duration
>120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charge Green LED
Optic Specifications
-
Light Source
High output LED Strip
-
LED Wattage
2W (Standby)
-
AS2293 Classification
C0-D3.2, C90-E2.5
-
F1-E
Industrial Lighting
Weatherproof Emergency Batten 1220mm
LC5321
The TITAN Emergency Weatherproof Batten has been introduced as a premium quality batten with high-efficiency. With an IP66 rating, it can withstand harsh environments. It is supplied with stainless steel mounting clips for easy installation without compromising its IP66 integrity. Also available with motion sensors and in standard weatherproof options. NATA Certified C0-D80 C90-D50.
Material Specifications
-
Housing
Moulded PC Body, Clear PC cover
-
Material
304 Stainless Clips
-
Dimensions
1220mm(L) x 97mm(W) x 82mm(H)
-
Impact Rating
IK08
-
Ingress Protection
IP66
-
Weight
2.0kg
-
Warranty
5 Year Replacement (Battery 2 Years)
Electrical Specifications
-
Power Supply
Tridonic 50W Non-Dim Driver, 350mA (240 pcs)
-
Connection Method
20mm Cable Gland at One end. 3 knock-out points in rear, and 1 in side.
-
Operating Temperature (Ta)
-20°C to +40°C
-
Input Voltage
240V
-
Battery & Charger System
Maintained Em. Kit 3 Hr Response Time. Batt. Charge Time: 24 Hrs, 4.5W Emergency Standby (587lm)
-
Mode of Operation
Maintained
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charger Green LED
Optic Specifications
-
Light Source
LG LEMWS28R80 Series
-
Delivered Lumens
5,680lm
-
CRI
80Ra
-
Beam Angle
120°
-
Colour Deviation
SDCM ≤ 3
-
AS2293 Classification
C0-D80 C90-D50
-
Reported L70 (Hours)
> 54,000 Hrs
-
Calculated L70 (Hours)
134,000 Hrs
-
BOH-WP
Exit / Emergency Lighting
Weatherproof IP65 Exit Light
EXS-AQUA65
Synthium LED Surface Mounted Weatherproof IP65 Exit Light c/w Synthium Battery. The AQUA65 is a sturdy wall-mounted LED Exit Light that is designed to withstand external environments and harsh weather conditions. it produces excellent illumination with a long-lasting battery for years of dependable exit lighting.
It has a robust, water-tight polycarbonate enclosure, providing excellent protection against water and dust. Suitable for Car Parks, exposed stairwells, indoor swimming centers, construction zones, train stations, and cool rooms. C0-D6.3, C90-E3.2
Using a remote box for the battery allows an operating temperature of -30°C to +40°C.
Viewing distance 24m.
Material Specifications
-
Material
Flame-Retardant Polycarbonate
-
Mounting
Surface Mounted - Wall or Ceiling
-
Dimensions
430mm(L) x 160mm(W) x 310mm(H)
-
Weight
3.0Kg
-
Ingress Protection
IP65
-
Warranty
5 Year Replacement
Electrical Specifications
-
Input Voltage
240V, 50Hz
-
Connection Method
Large Terminal Block, 20mm² Cable Entry
-
Mode of Operation
Maintained
-
Battery & Charger System
Lithium Battery w. Intelligent 3-stage charger and battery management
-
Emergency Duration
> 120 minutes
-
Indicators
Batter Charger Green LED
-
Operating Temperature (Ta)
1°C - 40°C
Optic Specifications
-
LED Wattage
4W (Standby)
-
Light Source
High output LED Strip
-
AS2293 Classification
C0-D6.3, C90-E3.2
Industrial Lighting
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
F1
Industrial Lighting
Weatherproof Batten 1220mm
LC5320
The TITAN 45W Weatherproof batten 1220mm has been introduced as a premium quality batten, high-efficiency, and very easy to install. The TITAN batten series is the perfect LED solution for replacing conventional fluorescent weatherproof luminaires. IP66, designed for harsh environments. This luminaire is designed to with the perfect balance of value and efficiency. Also available with motion sensors, and emergency kit.
Stainless Steel 316 Clips available.
Optic Specifications
-
Light Source
LG LEMWS28R80 Series
-
Delivered Lumens
5680lm
-
CRI
80Ra
-
Beam Angle
120°
-
Colour Deviation
SDCM ≤ 3
-
Reported L70 (Hours)
> 54,000 Hrs
-
Calculated L70 (Hours)
134,000 Hrs
-
F1-E
Industrial Lighting
Weatherproof Emergency Batten 1220mm
LC5321
The TITAN Emergency Weatherproof Batten has been introduced as a premium quality batten with high-efficiency. With an IP66 rating, it can withstand harsh environments. It is supplied with stainless steel mounting clips for easy installation without compromising its IP66 integrity. Also available with motion sensors and in standard weatherproof options. NATA Certified C0-D80 C90-D50.
Material Specifications
-
Housing
Moulded PC Body, Clear PC cover
-
Material
304 Stainless Clips
-
Dimensions
1220mm(L) x 97mm(W) x 82mm(H)
-
Impact Rating
IK08
-
Ingress Protection
IP66
-
Weight
2.0kg
-
Warranty
5 Year Replacement (Battery 2 Years)
Electrical Specifications
-
Power Supply
Tridonic 50W Non-Dim Driver, 350mA (240 pcs)
-
Connection Method
20mm Cable Gland at One end. 3 knock-out points in rear, and 1 in side.
-
Operating Temperature (Ta)
-20°C to +40°C
-
Input Voltage
240V
-
Battery & Charger System
Maintained Em. Kit 3 Hr Response Time. Batt. Charge Time: 24 Hrs, 4.5W Emergency Standby (587lm)
-
Mode of Operation
Maintained
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charger Green LED
Optic Specifications
-
Light Source
LG LEMWS28R80 Series
-
Delivered Lumens
5,680lm
-
CRI
80Ra
-
Beam Angle
120°
-
Colour Deviation
SDCM ≤ 3
-
AS2293 Classification
C0-D80 C90-D50
-
Reported L70 (Hours)
> 54,000 Hrs
-
Calculated L70 (Hours)
134,000 Hrs
Commercial Lighting
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
F2
Commercial Lighting
Panel Light, IP54, 1237x337
LC7415
BURNET 40W Cleanroom 1200x300 Panel Light is specifically designed for clean-room environments and other hygienic places. The BURNET Cleanroom Panel Light is named after Mr Frank Burnet, an Australian virologist best known for his contributions to immunology.
2-sides edge-lit for improved heat dissipation and longer lifespan. 100% PMMA Light Guide Plate, to avoid yellowing over time. Flicker-Free Driver. Bevel Edge Design, to eliminate dust build-up. Surface Mount Design, 12mm depth. For an easy install, make a 90mm cutout in the ceiling, to recess the LED driver in the ceiling cavity.
-
F2 alt
Commercial Lighting
Rectangle Panel Light 1200x300
LC7161
The BLAIZE 30W LED Panel Light is at the leading edge of commercial lighting. Use this 2' x 4' rectangular LED panel light for office lighting, basement lighting, gym lighting, school lighting and hospital lighting! BLAIZE LED light panels are designed for residential and commercial suspended grid ceilings. Replace existing fluorescent troffer light fixtures or use for new construction applications. Eliminate maintenance costs and enjoy a high efficiency light source. With an optical diffuser, the LED panel light delivers a smooth, flawless wall of illumination without visible bulbs or hot spots. Mount with our suspension kit, plaster recess kit or surface mount kit. Dimmable driver available.
Material Specifications
-
Material
White Aluminium Frame. PMMA
-
Dimensions
1195mm (L) x 295mm (W) x 12mm (D)
-
Ingress Protection
IP44
-
Warranty
5 Year Replacement
-
Weight
3.2Kg
-
Accessories
Surface Mount, Plaster Recess & Suspension Kits
Electrical Specifications
-
Power Supply
Non-Dim Boke Remote Driver
-
Options
DALI Available
-
Connection Method
Australian 2-Pin Plug & 1.0m Lead
-
Input Voltage
240V
-
Operating Temperature (Ta)
-20°C to +45°C
-
F2 alt - Kit
Commercial Lighting
Plaster Recess Kit
LC7043
The BLAIZE LED Panel Light is at the leading edge of commercial lighting. The plaster frame allows greater flexibility to the BLAIZE, CREST & APEX product range. It provides the ability for t-bar fixtures to be installed into plaster ceilings without any modifications to the original t-bar luminaire design. Surface Mount and Suspension Kits also available.
Dimensions
-
Dimensions
31mm Overall Depth
-
Cutout
LC7043: Plaster Cutout: 1215 x 315mm - Overall Frame: 1232x332mm
-
Cutout
LC7039: Plaster Cutout: 315 x 315mm - Overall Frame 332 x 332mm
-
Cutout
LC7041: Plaster Cutout: 615 x 315mm - Overall Frame 632 x 332mm
-
Cutout
LC7042: Plaster Cutout: 615 x 615mm - Overall Frame 632 x 632mm
-
Cutout
LC7044: Plaster Cutout: 1215 x 615mm - Overall Frame: 1232x632mm
-
F5
Commercial Lighting
Panel Light, IP54, 637x337
LC7402
The BURNET 24W Cleanroom Panel Light is specifically designed for clean-room environments and other hygienic places. It provides an ideal solution for pharmaceutical, medical, and other sterile areas. The BURNET Cleanroom Panel Light is named after Mr Frank Burnet, An Australian virologist best known for his contributions to immunology.
2-sides edge-lit for improved heat dissipation and longer lifespan. 100% PMMA Light Guide Plate, to avoid yellowing over time. Flicker-Free Driver. Bevel Edge Design, to eliminate dust build-up.
Surface Mount Design. 12mm depth. For an easy install, make a 90mm cutout in the ceiling, to recess the LED driver in the ceiling cavity.
Optic Specifications
-
Light Source
4014-JT-K1606 Series
-
Nominal Lumens
2,455lm (4000K)
-
Efficacy
98.1 lm/W
-
CRI
Ra 82
-
Beam Angle
120°
-
Reported L70 (Hours)
> 54,000 Hrs
Downlights
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
L2-R-B
Downlights
Recessed Fixed Downlight
LC3590B
The EMPRESS 13W fixed downlight is an architectural downlight, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians. It adopts a high lumen COB LED, and PMMA diffuser with even light output. The DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Dimensions
110mm Face Dia x 65mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable, 23-40VDC 280mA
-
System Watts
11.4W - 12.1W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L2-R-W
Downlights
Recessed Fixed Downlight
LC3590
The EMPRESS 13W fixed downlight is an architectural downlight, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians. It adopts a high lumen COB LED, and PMMA diffuser with even light output. The DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Dimensions
110mm Face Dia x 65mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable, 23-40VDC 280mA
-
System Watts
11.4W - 12.1W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L4-R-W
Downlights
Recessed Gimbal Downlight
LC3582
The EMPRESS 8W gimbal downlight is available as DALI dimmable, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians.
EMPRESS 8W LED gimbal Downlight adopts a high lumen COB LED, and PMMA diffuser with even light output. DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Adjustment
30° gimbal
-
Dimensions
110mm Face Dia x 50mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable 23-40VDC 180mA
-
System Watts
7.7W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L4-R-B
Downlights
Recessed Gimbal Downlight
LC3582B
The EMPRESS 8W gimbal downlight is available as DALI dimmable, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians.
EMPRESS 8W LED gimbal Downlight adopts a high lumen COB LED, and PMMA diffuser with even light output. DALI dimmable version has shown great popularity with excellent dimming effect.
Material Specifications
-
Material
High Grade Aluminum + Reflector
-
Adjustment
30° gimbal
-
Dimensions
110mm Face Dia x 50mm (H)
-
Cutout
90mm (Dia)
-
Colour
Matt White (Black & Silver available for project orders)
-
Ingress Protection
IP65
-
Impact Rating
IK06
-
Warranty
5 Year Replacement
Electrical Specifications
-
Power Supply
Dimmable 23-40VDC 180mA
-
System Watts
7.7W
-
Input Voltage
240V, 50/60Hz
-
Operating Temperature (Ta)
-20°C to +45°C
-
Thermal Testing
Compliant with IC Classification
-
Protection
Voltage Overload, Temp Overload, Short Circuit
-
Connection Method
Australian Plug & 1.2m Lead
-
L1-RT-W
Downlights
Rectangle Downlight
LC3425W
The WALTZ 20W rectangle downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type and lens type options. Rectangle shape with two heads. The luminaire is tilted 25° in all directions (360°), perfectly meeting the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote Driver, 500mA, Flicker Free
-
Operating Temperature (Ta)
-20°C to +45°C
-
Input Voltage
240V
Optic Specifications
-
Light Source
2 x Citizen COB LED
-
Delivered Lumens
2000lm
-
CRI
>80
-
Reported L70 (Hours)
> 54,000 Hrs
-
L1-RT-B
Downlights
Rectangle Downlight
LC3425B
The WALTZ 20W rectangle downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type and lens type options. Rectangle shape with two heads. The luminaire is tilted 25° in all directions (360°), perfectly meeting the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote Driver, 500mA, Flicker Free
-
Operating Temperature (Ta)
-20°C to +45°C
-
Input Voltage
240V
Optic Specifications
-
Light Source
2 x Citizen COB LED
-
Delivered Lumens
2000lm
-
CRI
>80
-
Reported L70 (Hours)
> 54,000 Hrs
-
L2-SQ-W
Downlights
Square Downlight
LC3420W
This WALTZ 10W downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type optic. Square shape with one head. The luminaire is tilted 25° in all directions (360°), perfectly meet the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote, 230mA, Flicker Free
-
System Watts
9.7W
-
Input Voltage
240V
Optic Specifications
-
Light Source
1 x Citizen COB LED
-
Optics
Reflector Type
-
Delivered Lumens
954lm
-
Efficacy
98.3 lm/W
-
CRI
Ra 83
-
Reported L70 (Hours)
> 54,000 Hrs
-
L2-SQ-B
Downlights
Square Downlight
LC3420B
This WALTZ 10W downlight is a gyro design. It adopts a Citizen COB and a high transmittance rate lens to keep high light efficiency. ADC12 Aluminum profile provides excellent thermal dissipation. Modular design with reflector type optic. Square shape with one head. The luminaire is tilted 25° in all directions (360°), perfectly meet the demands of different lighting angles. Beam angles available are 36° or 60°.
Electrical Specifications
-
Power Supply
Remote, 230mA, Flicker Free
-
System Watts
9.7W
-
Input Voltage
240V
Optic Specifications
-
Light Source
1 x Citizen COB LED
-
Optics
Reflector Type
-
Delivered Lumens
954lm
-
Efficacy
98.3 lm/W
-
CRI
Ra 83
-
Reported L70 (Hours)
> 54,000 Hrs
-
A7
Downlights
LED Recessed Downlight 140mm
LC3631
The KARGO 18W downlight is phase dimmable, constructed with a thermal heatsink included to ensure the downlight disperses any heat keeping it cool to touch. Used by builders, developers and a favourite with electricians.
KARGO 18W LED Downlight adopts a high lumen SMD LED, and PMMA diffuser with even light output.
Electrical Specifications
-
Power Supply
Remote Driver 300mA, Phase Dim
-
Options
DALI Availbale
-
System Watts
17.1W - 17.7W
-
Thermal Testing
Compliant with IC-4 Classification
-
Operating Temperature (Ta)
-20°C to +45°C
-
Input Voltage
240V, 50/60Hz
-
Connection Method
Australian 2-Pin Plug & 0.6m Lead
Optic Specifications
-
Light Source
18W SMD 2835 LED
-
Delivered Lumens
1775lm (3000K)
-
Delivered Lumens
2062lm (4000K)
-
Delivered Lumens
1990lm (5500K)
-
Efficacy
Up to 120.3lm/W
-
CRI
>82Ra
-
Beam Angle
100°
-
Calculated L70 (Hours)
L70B50 = > 60,000 Hrs
-
Calculated L80 (Hours)
L80B50 = > 60,000 Hrs
-
Calculated L90 (Hours)
L90B50 = > 56,000 Hrs
Track Lighting
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
L7-B
Track Lighting
Adjustable Tracklight
LC5194
Track Lighting is popular in applications such as museums, art galleries, restaurants and retail spaces because of its unique flexibility in positioning the direction of the light, and the ability to add or remove fittings to achieve the desired luminance levels. With precise beam control which ranges from 12° to 40°, the ALPHA Track Light serves to focus the viewer's attention onto a piece of art work or display.
Electrical Specifications
-
Power Supply
Integrated Tridonic 15W Driver 350mA, Non-Dim
-
System Watts
15.0 - 15.8W
-
Options
DALI available
-
Input Voltage
240V
-
Operating Temperature (Ta)
-20ºC ~ +40ºC
-
Connection Method
3-Circuit Track Connector. Sold Separately
Optic Specifications
-
Light Source
13W Citizen LED
-
Delivered Lumens
1,027lm (3000K)
-
Delivered Lumens
1,191lm (4000K)
-
Efficacy
Up to 79.4lm/W
-
Beam Angle
40° (12°/ 25° options)
-
CRI
Ra >91
-
Colour Deviation
SDCM ≤ 3 (MacAdam)
-
Reported L70 (Hours)
> 54,000 Hrs
-
L7 - Track (2m)
Track Lighting
Surface Mount
LC3803
Surface Mount Track Light, 20 amp, 2 metre lengths. Can be cut to length onsite. Applications include Retail spaces, Commercial offices, Showrooms and art galleries.
The ALPHA Track is easy to install in any project, with all the required components available to provide any custom configuration. The spot lights can be adjusted to give you endless flexibility with light positioning and brightness.
-
Lt - Track (3m)
Track Lighting
Surface Mount
LC3806
Surface Mount Track Light, 20 amp, 2 metre lengths. Can be cut to length onsite. Applications include Retail spaces, Commercial offices, Showrooms and art galleries.
The ALPHA Track is easy to install in any project, with all the required components available to provide any custom configuration. The spot lights can be adjusted to give you endless flexibility with light positioning and brightness.
-
L7 - Live End
Track Lighting
Live End Connector
LC3861
Surface Mount Track Light Connectors. Includes codes for Live-End Connectors, Live-Straight Connectors, Mini Straight Connectors, Flexible Connectors, and End Caps.
Applications include Retail spaces, Commercial offices, Showrooms, and art galleries.
-
L7 - End Cap
Track Lighting
3 Circuit End Cap
LC3849
Surface Mount Track Light Connectors. Includes codes for Live-End Connectors, Live-Straight Connectors, Mini Straight Connectors, Flexible Connectors, and End Caps.
Applications include Retail spaces, Commercial offices, Showrooms and art galleries.
-
L7 - Mini Joiner
Track Lighting
3 Circuit Mini Joiner
LC3841
Surface Mount 3-Circuit Mini Joiner. Track Lights need Mini Connectors.
Applications include Retail spaces, Commercial offices, Showrooms, and art galleries.
-
L7 - Corner Joiner
Track Lighting
3 Circuit 90° Connector
LC3815
Surface Mount Track Light Connectors. Includes Live-End Connectors, Live-Straight Connectors, Mini Straight Connectors, Flexible Connectors, and End Caps. 3-Circuit Left Corner Track Joiner, and Right Corner Track Joiner.
Applications include Retail spaces, Commercial offices, Showrooms, and art galleries.
-
L8
Track Lighting
Adjustable Tracklight
LC5107B
Track Lighting is popular in applications such as museums, art galleries, restaurants, and retail spaces because of its unique flexibility in positioning the direction of the light, and the ability to add or remove fittings to achieve the desired luminance levels. With a 60° beam angle and changeable colour temperature, the ESSENCE Track Light is perfect for a versatile environment and can set the mood in any room.
Electrical Specifications
-
Power Supply
Integrated Driver, Phase-Dim
-
Input Voltage
240V
-
Operating Temperature (Ta)
-20ºC ~ +40ºC
-
Connection Method
4-Wire, 3-Circuit Track Connector
Linear Lighting
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
LED1
Linear Lighting
LED Strip Light CRI95
LC9230
The INFINITY LED Strip Series is a neat, unobtrusive means to layered lighting. This beautifully small 8mm strip fits into almost any nook or cranny, whilst providing your home or work space with a gorgeous glow. Perfect for spaces with intimate settings and low light requirements, applications could include soft lighting under bench tops, behind a bar and receded in tight cavities in walls and ceilings to animate dark spaces with light. The 10W LED Strip utilises the latest generation SMD 2216 Chipset and is mounted on 8mm PCB backing.
Optic Specifications
-
Light Source
180 LED/m, 2216 SMD
-
Nominal Lumens
700lm/m
-
LED Wattage
10W/m
-
Beam Angle
120°
-
CRI
> 95Ra
-
Colour Deviation
SDCM ≤ 3
-
Reported L70 (Hours)
> 54,000 Hrs
-
LED1 - Recessed
Linear Lighting
Aluminium Profile
LC9150
The LYNE 1707 Recess Profile is a shallow recessed extrusion with sufficient depth to reduce light hot spotting. Available in 2m lengths. Aluminium profile with snap-fit diffuser. Designed for mounting LED strip up to 12mm width. Channels on the sides of the profile allow you to clip the profile into metal clips. Plastic end caps come in pairs. One having a hole for the wires to pass through.
Material Specifications
-
Material
Anodised Aluminium
-
Ingress Protection
IP20
-
Application
Joinery, Feature Lighting, Task Lighting
-
Dimensions
17.3mm(W) x 7mm(D)
-
Accessories
End Caps & Mounting Clips
-
Warranty
5 Year Replacement
-
Optics
PMMA Plastic Diffuser
-
Mounting
Recessed
-
Light Source
INFINITY 10W LED Strip recommended
-
LED1 - Surface
Linear Lighting
Aluminium Profile
LC9145
The LYNE 1707 SURFACE Profile is a surface mounted extrusion with sufficient depth to reduce light hot spotting. Available in 2m lengths. Aluminium Profile with snap-fit diffuser. Designed for mounting LED Strip up to 12mm width. Channels on the sides of the profile allow you to clip the profile into metal clips. Plastic end caps come in pairs. One having a hole for the wires to pass through. Compatible with Decrolux INFINITY LED Strip.
Material Specifications
-
Material
Anodised Aluminium
-
Finish
Aluminium, Black or White
-
Ingress Protection
IP20
-
Application
Joinery, Feature Lighting, Task Lighting
-
Dimensions
17.3mm(W) x 7mm(D)
-
Mounting
Surface Mount
-
Accessories
End Caps & Mounting Clips
-
Warranty
5 Year Replacement
-
LED1 (Corner)
Linear Lighting
Aluminium Profile
LC9160B
The LYNE 1818 Corner Profile is a surface mounted extrusion with sufficient depth to reduce light hot spotting. Aluminium profile with snap-fit diffuser. Designed for mounting LED strip up to 12mm width. Channels on the sides of the profile allow you to clip the profile into metal clips. Plastic end caps come in pairs. One having a hole for the wires to pass through. Designed to fit into corners and emit diffused light on a 45° angle.
Material Specifications
-
Material
Anodised Aluminium
-
Ingress Protection
IP20
-
Application
Joinery, Feature Lighting, Task Lighting
-
Dimensions
18mm x 18mm
-
Accessories
End Caps & Mounting Clips
-
Warranty
5 Year Replacement
-
Optics
PMMA Plastic Diffuser
-
Mounting
45° Angle
-
Light Source
INFINITY 10W or 14W recommended
-
LED2
Linear Lighting
12W Side Bending Cable
LC9104
The NEON FLEX 12W Side-bending cable is a highly advanced LED Neon Flex technology, equipped with closely spaced SMD chips and an ultra-thin housing. With a minimum bending radius of R>60mm, it boasts a side-bending design that delivers uniform lighting. The product is perfect for both indoor and outdoor decorative lighting as well as architectural outline lighting, with an IP67 rating that guarantees weatherproofing. This innovative and versatile product is an excellent choice for anyone looking for reliable and high-quality LED Neon Flex lighting.
Material Specifications
-
Dimensions
12mm x 20mm
-
Cuttable Length
50mm
-
Roll Length
5m
-
Ingress Protection
IP67
-
Warranty
5 Year Replacement
Optic Specifications
-
Light Source
12W
-
Delivered Lumens
400lm/m
-
Beam Angle
160°
-
CRI
> 90Ra
-
Reported L70 (Hours)
> 36,000 Hrs
-
LED2
Linear Lighting
to suit Neon Flex 12mmx20mm
LC9109
This profile is a surface mounted extrusion which suits Neon Flex Side-bending cable. It is suitable for use in both indoor and outdoor decorative lighting, as well as architectural outline lighting.
Ceiling Lights
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
LP1
Ceiling Lights
Tube Pendant
LC1085
The STRAW 15W Tubular Pendant Light is a modern standout feature. When suspended from the ceiling, it illuminates the room with a warm, comfortable spread of light. This contemporary pendant boasts a white acrylic shade, red metal canopy, red cord, and red top/bottom cover, with a 1.5 metre suspension. Reminiscent of McDonald's drinking straws, it is perfect for creating a big impact, especially when installed in rows for a captivating visual display.
Used in McDonald's Family Restaurant Fitouts throughout Australia.
Material Specifications
-
Material
Acrylic Shade with Metal Canopy and Covers
-
Colour
White Shade, Red Canopy, Red Cord, Red Top/Bottom Cover
-
Dimensions
Tube: 800mm(L) x 70mm(W) x 70mm(D)
-
Dimensions
Base Plate: 120mm Dia x 40mm (H)
-
Suspension Length
1500mm Adjustable (Max.)
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Optic Specifications
-
Light Source
Integrated LED Strip
-
Nominal Lumens
450lm
-
CRI
>80Ra
-
Colour Deviation
SDCM ≤ 3
-
Reported L70 (Hours)
>54,000 Hrs
Power Supplies
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
LED1/ LED2 - PS
Power Supplies
Power Supply 24V
LC6792
Osram Element 120W Power Supply 24V is a Constant Current LED Power Supply. Element LED Power Supply with high efficiency and reliability in small compact housing fits in light fixtures for office and shop lighting. Suitable for Shelf Lighting, Cove Lighting, and Under Cabinet Lighting.
Simple to use with easy installation and LED connection. SELV (<60V)
Material Specifications
-
Material
Plastic Casing
-
Weight
386g
-
Dimensions
260 x 40 x 31mm
-
Ingress Protection
IP20
-
Warranty
3 Year Warranty
Electrical Specifications
-
Input Voltage
240V 50/60Hz
-
Inrush Current
< 32 A
-
Output Current
700mA
-
Output Voltage
21VDC - 42VDC
-
Operating Temperature (Ta)
-10°C to +50°C
-
Thermal Testing
30,000 Hrs at 75°C
-
Protection
Over-Temperature, Overload, Short-Circuit
Interior Wall Lights
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
LP4
Interior Wall Lights
Red Shade with Black Frame
LC1259
The BARCLAY Wall Light is a sophisticated blend of style and functionality. The sleek sand black frame perfectly complements the vibrant red shade, creating a striking visual contrast. Designed for an E27 bulb (not included), this modern fixture adds a touch of elegance to any space. The bold colour combination adds a touch of contemporary flair, making it an eye-catching focal point.
Used in McDonald's Family Restaurant Fitouts throughout Australia.
Material Specifications
-
Finish
Sand Black Frame, Red Shade
-
Dimensions
772mm (L) x 255mm (Projection from Wall)
-
Dimensions
Base Plate: 100mm (W) x 250mm (H)
-
Dimensions
Red Shade Dia: 260mm
-
Ingress Protection
IP20
-
Warranty
1 Year Replacement
-
LP2
Interior Wall Lights
Oak Timber Wall Light
LC1086
The FRY 10W Oak Timber Wall Light is a linear fixture designed to make a bold statement. Its design, reminiscent of McDonald's fries, adds a playful touch. Crafted with Natural Oak and featuring an Acrylic Diffuser, this wall light blends style and functionality, offering a striking illumination that harmonises with diverse environments.
Used in McDonald's Family Restaurant Fitouts throughout Australia.
Optic Specifications
-
Light Source
10W LED Strip
-
Delivered Lumens
> 450lm
-
CRI
> 80Ra
-
Reported L70 (Hours)
>54,000 Hrs
LED Light Globes
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
LP4 - Globe
LED Light Globes
6W LED
LC2305
This 6 watt LED dimmable light bulb has been designed to emulate the classic incandescent bulb. This LED bulb is a powerful light (equivalent to that of a standard 40w incandescent bulb) making it environmentally friendly.
Inside these LED bulbs are low energy LED strips, designed to imitate the vintage style incandescent filaments. These 95mm round LED globes have very low energy consumption and an extremely long lifespan as it uses 80% less power than conventional incandescent bulbs. They give instant 100% light, no warm-up time. Dimmable so you can lower the intensity to create atmospheric lighting. Each LED bulb has a 360° beam spread, ideal for a wide variety of lighting decors; from home use, café interiors, restaurant lighting, office fit outs and more!
Material Specifications
-
Finish
Clear
-
Dimensions
130mm (L) x 95mm (Dia)
-
Typical Lifetime
15,000 hours
Optic Specifications
-
Delivered Lumens
500lm
-
Beam Angle
360°
-
CRI
90Ra
Exit / Emergency Lighting
Please fill in the quantity required for any products you require, fill in your details below and our lighting specialists will be in touch with a quotation.
-
EM-W
Exit / Emergency Lighting
Recessed Emergency Light
EMS-PRO
Synthium D80 LED Recessed Emergency Light c/w Synthium Battery.
The Emergensee Pro combines a lifetime-warranted LED with a Syclops optical lens to deliver an unobtrusive, ultra bright source of illumination intended to alleviate panic and establish a safe, distinct and efficient egress path in the event of an emergency. It can be used in almost all internal general applications including offices, shopping centres, commercial properties, and residential buildings.
Synthium nanotechnology is an advanced environmentally-sustainable energy development that offers extended battery life, low cost of ownership, enhanced performance and improved safety.
Electrical Specifications
-
Input Voltage
230V; 50Hz
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger & battery management
-
Protection
Overcharge, low voltage disconnect, overcurrent, short circuit
-
Mode of Operation
Non-Maintained
-
Connection Method
Australian Plug + 1.2m Lead
-
Emergency Duration
>120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charge Green LED
-
EM-B
Exit / Emergency Lighting
Recessed Emergency Light
EMS-PRO-B
Synthium D80 LED Recessed Emergency Light c/w Synthium Battery.
The Emergensee Pro combines a lifetime-warranted LED with a Syclops optical lens to deliver an unobtrusive, ultra bright source of illumination intended to alleviate panic and establish a safe, distinct and efficient egress path in the event of an emergency. It can be used in almost all internal general applications including offices, shopping centres, commercial properties, and residential buildings.
Synthium nanotechnology is an advanced environmentally-sustainable energy development that offers extended battery life, low cost of ownership, enhanced performance and improved safety.
Electrical Specifications
-
Input Voltage
230V; 50Hz
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger & battery management
-
Protection
Overcharge, low voltage disconnect, overcurrent, short circuit
-
Mode of Operation
Non-Maintained
-
Connection Method
Australian Plug + 1.2m Lead
-
Emergency Duration
>120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charge Green LED
-
EX-BD-B
Exit / Emergency Lighting
Recessed Exit Light
EXS-BLADE-B
Exodus LED Recessed Mounted Blade Exit Light c/w Synthium Battery. The EXODUS Blade is a sleek and aesthetically pleasing recessed lithium exit light that provides a touch of class and elegance to enhance the look of any premium interior space.
Its ease of installation and stylish Running Man pictogram positions this fitting as the leading edge in the industry. Suited for apartments, public buildings, offices and retail outlets. Includes all variations of Running Man pictogram. C0-D6.3, C90-E3.2
Material Specifications
-
Material
Flame - Retardant Polycarbonate
-
Application
Recessed - Plaster Ceilings
-
Dimensions
457mm(L) x 100mm(W) x 200mm(H)
-
Cutout
430mm x 75mm cutout
-
Weight
1.5Kg
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Electrical Specifications
-
Mode of Operation
Maintained
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger and battery management
-
Operating Temperature (Ta)
1°C - 40°C
-
Protection
Overcharge, Low Voltage Disconnect, overcurrent, Short Circuit
-
Connection Method
Complete with Australian Plug + 1.2m Lead
-
Emergency Duration
> 120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charger Green LED
Optic Specifications
-
LED Wattage
4W (Standby)
-
Light Source
High Output LED Strip
-
AS2293 Classification
C0-D6.3, C90-E3.2
-
EM-BD
Exit / Emergency Lighting
Recessed Exit Light
EXS-BLADE
Exodus LED Recessed Mounted Blade Exit Light c/w Synthium Battery. The EXODUS Blade is a sleek and aesthetically pleasing recessed lithium exit light that provides a touch of class and elegance to enhance the look of any premium interior space.
Its ease of installation and stylish Running Man pictogram positions this fitting as the leading edge in the industry. Suited for apartments, public buildings, offices and retail outlets. Includes all variations of Running Man pictogram. C0-D6.3, C90-E3.2
Material Specifications
-
Material
Flame - Retardant Polycarbonate
-
Application
Recessed - Plaster Ceilings
-
Dimensions
457mm(L) x 100mm(W) x 200mm(H)
-
Cutout
430mm x 75mm cutout
-
Weight
1.5Kg
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Electrical Specifications
-
Mode of Operation
Maintained
-
Battery & Charger System
Synthium Battery w. Intelligent 3-stage charger and battery management
-
Operating Temperature (Ta)
1°C - 40°C
-
Protection
Overcharge, Low Voltage Disconnect, overcurrent, Short Circuit
-
Connection Method
Complete with Australian Plug + 1.2m Lead
-
Emergency Duration
> 120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charger Green LED
Optic Specifications
-
LED Wattage
4W (Standby)
-
Light Source
High Output LED Strip
-
AS2293 Classification
C0-D6.3, C90-E3.2
-
EX-BOH
Exit / Emergency Lighting
Surface Mount Exit Light
EXS-PRIME
Synthium LED Surface Mounted Exit Light complete with Synthium Battery. The EXODUS Prime is a low maintenance, wall or ceiling mountable exit light solution with all variations of the running man pictogram which offers many years of reliable, succinct and efficient Exit Lighting.
Using a simple slide and connect installation, its robust design allows it to be used in a wide variety of indoor applications, ranging from offices to retail stores, cafes and public spaces. C0-D3.2, C90-E2.5
Material Specifications
-
Material
Flame-Retardant Polycarbonate
-
Mounting
Surface Mounted - Wall or Ceiling
-
Dimensions
355mm(L) x 65mm(W) x 210mm(H)
-
Weight
1.5Kg
-
Ingress Protection
IP20
-
Warranty
5 Year Replacement
Electrical Specifications
-
Input Voltage
240V; 50Hz
-
Mode of Operation
Maintained
-
Battery & Charger System
Lithium Battery w. Intelligent 3-stage charger and battery management
-
Operating Temperature (Ta)
1°C - 40°C
-
Protection
Overcharge, low voltage disconnect, overcurrent, short circuit
-
Connection Method
Large Terminal Block, 20mm² Cable Entry
-
Emergency Duration
>120 Minutes
-
Testing Facility
Manual Test Switch
-
Indicators
Battery Charge Green LED
Optic Specifications
-
Light Source
High output LED Strip
-
LED Wattage
2W (Standby)
-
AS2293 Classification
C0-D3.2, C90-E2.5
-
BOH-WP
Exit / Emergency Lighting
Weatherproof IP65 Exit Light
EXS-AQUA65
Synthium LED Surface Mounted Weatherproof IP65 Exit Light c/w Synthium Battery. The AQUA65 is a sturdy wall-mounted LED Exit Light that is designed to withstand external environments and harsh weather conditions. it produces excellent illumination with a long-lasting battery for years of dependable exit lighting.
It has a robust, water-tight polycarbonate enclosure, providing excellent protection against water and dust. Suitable for Car Parks, exposed stairwells, indoor swimming centers, construction zones, train stations, and cool rooms. C0-D6.3, C90-E3.2
Using a remote box for the battery allows an operating temperature of -30°C to +40°C.
Viewing distance 24m.
Material Specifications
-
Material
Flame-Retardant Polycarbonate
-
Mounting
Surface Mounted - Wall or Ceiling
-
Dimensions
430mm(L) x 160mm(W) x 310mm(H)
-
Weight
3.0Kg
-
Ingress Protection
IP65
-
Warranty
5 Year Replacement
Electrical Specifications
-
Input Voltage
240V, 50Hz
-
Connection Method
Large Terminal Block, 20mm² Cable Entry
-
Mode of Operation
Maintained
-
Battery & Charger System
Lithium Battery w. Intelligent 3-stage charger and battery management
-
Emergency Duration
> 120 minutes
-
Indicators
Batter Charger Green LED
-
Operating Temperature (Ta)
1°C - 40°C
Optic Specifications
-
LED Wattage
4W (Standby)
-
Light Source
High output LED Strip
-
AS2293 Classification
C0-D6.3, C90-E3.2